Friday, December 21, 2007
more fire
Today we had a small fire going in the oven most of the day, then the plywood forms and 2x4 supports under the slab lit up. Not such a small fire any more.
Thursday, December 20, 2007
fire!
Well, today ended up being a big day. We've been waiting for some chimney pieces to arrive, and managed to get the final one today, and had the chimney fully assembled by late afternoon. So we lit a small fire in the oven.
There is still a lot of work to do on the oven, but it felt great to light it. We plan to light a small fire in it each day to help dry it out a bit before putting on the insulation and outer layers. It should also help keep us a bit warmer while we work on the bakery in this chilly weather.
Tuesday, December 11, 2007
windows etc
My brother, Ollie, just left this morning after a week long visit. He gave us a hand installing most of our windows, and here is the result. We are still waiting for the windows that will be able to open, and the doors will hopefully be hung this week. The process of shingling continues, but is almost done. Most of our chimney pieces have arrived, and should be installed soon. We can then start lighting small fires in the oven to dry it out.
A quick tip to those of you that have never installed windows before - they don't take kindly to being hammered on.
Friday, November 16, 2007
the oven's new clothes
Well, we finally got around to putting the cement cladding on the oven dome! We spent yesterday repairing the cement mixer, and glopping the special refractory cement on to the dome. It really changes the look of the oven. Today, we pulled the dome forms out of the oven and used some child labour to clean out the bake chamber (although I don't think we can call it "child labour", since technically, we didn't pay anything.

Friday, November 9, 2007
lots of progress
It has been a long time since my last post, longer than I had realized. A lot has been accomplished since September 13, but there is still much to be done. The roof was finished (aside from the actual green portion, which may be a while in the making), the first coat of varnish and oil was finished last week, and much of the window framing process has been done. Windows and chimney have been ordered. Outside window frames have been installed in the two front lower windows. A bit more work on the oven was done. Electrical wiring has been installed inside. We are waiting for the new power pole to be put up. I think the bakery is looking great, and it feels good to be able to cross things off our list on a regular basis again. It still hurts my head occasionally when I think about how much there is still left to do, but we chip away at it and it seems to get done. Here are a few photos to help show our progress:


Thursday, September 13, 2007
back to it
We are back to it after a short hiatus. My shoulder is improving, but still bothering me considerably, so we have enlisted the help of friends to get us caught up on construction. With the help of Christy's Dad and our friend Patrick, the roof decking is all in place and fastened. The plywood and other roofing materials are being delivered tomorrow, and hopefully by the end of a small work party on Sunday, the roof will be ready for the roofer to apply the torch-on. Oven parts are on order, and we will get back to that as soon as they arrive.
Wednesday, August 8, 2007
quick update
We haven't managed to put much time in working on the building lately. Last week we spent a day going to a bakery auction in Nanaimo, then pretty much two days bringing our purchases back to Gabriola. We did buy a few things that we really needed for the new bakery, so it was a success. We found a fridge, sinks, baking trays, cooling racks, tray carts, a table, a great mixer, and other assorted items. Just baking enough to keep the stores stocked is taking up a lot of time as well. August has been very busy so far.
In other, more nerve-racking news, I was involved in what ended up being (thankfully) a single vehicle accident last Sunday. I was responding to a first responder page for the fire department, alone in a pumper truck, when a minivan pulled out in front of me at an intersection. After making sure the other lane was clear, I was able to swerve around the front of the van, missing him completely. With the weight of all the water on the truck, the back of the truck started to slide, and the truck ended up across the roadway, then rolled over once, stopping back on its wheels! In mid roll, the back of the truck took out the bottom of a power pole, and one of the power lines snapped, starting 4-5 small fires in the bushes. Once the truck had stopped, I got out, called dispatch on a radio, and tried to find a fire extinguisher. By the time I had, the fires had put themselves out, and there wasn't much to do except wait for the other emergency crews to arrive. To everyone's amazement (especially mine), I made it through the incident with only a couple of sore spots! As lucky as I was, I strongly suggest to everyone to take extra care while driving... You can never trust that another driver will do what you expect. Here are a couple of photos of the ruined truck.
The large metal unit in the front is the water tank that used to make up the bulk of the rear of the truck. In the foreground you can see a piece of the power pole. Most of the rescue equipment on the truck was ejected as it rolled. A huge thank you to the rest of the Gabriola fire fighters for cleaning up my mess. And thanks to whoever it was that was looking after me, and allowed me to walk away from the incident.
In other, more nerve-racking news, I was involved in what ended up being (thankfully) a single vehicle accident last Sunday. I was responding to a first responder page for the fire department, alone in a pumper truck, when a minivan pulled out in front of me at an intersection. After making sure the other lane was clear, I was able to swerve around the front of the van, missing him completely. With the weight of all the water on the truck, the back of the truck started to slide, and the truck ended up across the roadway, then rolled over once, stopping back on its wheels! In mid roll, the back of the truck took out the bottom of a power pole, and one of the power lines snapped, starting 4-5 small fires in the bushes. Once the truck had stopped, I got out, called dispatch on a radio, and tried to find a fire extinguisher. By the time I had, the fires had put themselves out, and there wasn't much to do except wait for the other emergency crews to arrive. To everyone's amazement (especially mine), I made it through the incident with only a couple of sore spots! As lucky as I was, I strongly suggest to everyone to take extra care while driving... You can never trust that another driver will do what you expect. Here are a couple of photos of the ruined truck.
The large metal unit in the front is the water tank that used to make up the bulk of the rear of the truck. In the foreground you can see a piece of the power pole. Most of the rescue equipment on the truck was ejected as it rolled. A huge thank you to the rest of the Gabriola fire fighters for cleaning up my mess. And thanks to whoever it was that was looking after me, and allowed me to walk away from the incident.
Monday, July 16, 2007
roof building, roof burning
Shortly after the end of our work day at the bakery, we got a page for a roof fire. We don't get many structure fires, so it was an exciting way to end the day. I made it home just in time to eat my catered anniversary dinner before someone else did.
Thursday, July 12, 2007
walls
Subscribe to:
Posts (Atom)